Roberlo ME1 Multyfiller Express DTM

Roberlo Multyfiller Express DTM – HS 4:1 Express Acrylic Primer

Roberlo Multyfiller Express DTM is an HS 4:1 express acrylic primer designed to deliver an excellent balance between covering power and fast drying for automotive bodywork repair. This specific listing corresponds to ME6 (Black) (as referenced by the vendor page).

Key Features

• HS 4:1 Express acrylic primer designed for a strong balance of coverage and fast drying.
• High isolating quality and excellent adhesion to common repair substrates.
• Very fast drying — positioned for partial repairs or air drying.
• Can be used as high build or medium build (as described in the vendor technical notes).

Suitable Surfaces

• Putties and fillers
• Properly sanded hardened paints (OEM/refinish)
• Steel and aluminum

Film Build & Sanding (as listed)

• Up to ~70% HS content (as listed).
• High build: up to 160–200 microns (6.3–7.88 mils) per 2 coats.
• Medium build: approximately 76–101 microns (3–4 mils) per 2 coats.
• Ready to sand: listed as 45 minutes at 68°F (vendor notes).
• Sanding guidance: start at P360; hand sanding at P600 (dry or wet), as listed.

Technical Specifications

How to Use

• Surface prep: clean and prepare the surface (remove rust, dust, grease, and contaminants).
• Mixing: mix following the recommended mixing ratio and product system instructions.
• Application: apply and respect flash-off times between coats.
• Sand: sand once dry to level the surface before painting.
• Final prep: degrease to remove residue before final paint.